A431-V marine VHF antenna includes 20’ of low-loss RG-8/X cable permanently attached to the antenna and a high-quality FME, non-solder type connector for a hassle-free, professional installation. The A431-V uses copper and brass elements for maximum range and efficiency, all enclosed in a stylish UV resistant radome with stainless steel ferrule.
Used with standard 1”-14 mounts, this thick-walled fiberglass antenna is well suited for use on hardtops or T-tops on smaller vessels, where the pounding of wave motion can put additional stress on a taller antenna. All KJM antennas are backed by a 5-Year warranty, so you can communicate with confidence!
4 Foot Marine VHF
A431-VB
Marine VHF Antenna
4 foot / 3db gain
Features
Specifications
Marine VHF Band, 156-163 MHz
3 db
4' Black Fiberglass with Stainless Steel Ferrule
50 ohms
50 Watts
Vertical
Copper and Brass
Less than 1.5:1 at 156.8 MHz
20' RG-8/X
FME, non-solder type included
Not Grounded: The antenna will read open on continuity test
Five years
Frequency Range
Average Gain
Housing
​
Impedance
Max. Input Power
Polarization
Elements
SWR
Cable Supplied
Connector
DC Ground
Warranty
-
Single 4' section, 3db gain
-
Brass and copper elements for maximum range and efficiency
-
Stainless steel ferrule with standard 1″-14 thread
-
20ft RG-8/X low-loss cable
-
FME, non-solder type connection included
-
Suggested mount: M101 (sold separately)
-
Five-year warranty
AC201
20' Extension
SPL100
Band Separator
M201
Antenna Mount
